ZyXEL Communications NWA5121-N User Manual page 81

Figure 48 Configuration > Object > User > Setting
The following table describes the labels in this screen.
Table 40 Configuration > Object > User > Setting
LABEL
User Default Setting
Default Authentication
Timeout Settings
Edit
#
User Type
Lease Time
Chapter 7 User
DESCRIPTION
These authentication timeout settings are used by default when you create a
new user account. They also control the settings for any existing user accounts
that are set to use the default settings. You can still manually configure any
user account's authentication timeout settings.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
This field is a sequential value, and it is not associated with a specific entry.
These are the kinds of user account the NWA/WAC supports.
• admin - this user can look at and change the configuration of the NWA/
WAC
• limited-admin - this user can look at the configuration of the NWA/WAC
but not to change it
• user - this is used for embedded RADIUS server and SNMPv3 user access
This is the default lease time in minutes for each type of user account. It
defines the number of minutes the user has to renew the current session before
the user is logged out.
Admin users renew the session every time the main screen refreshes in the
Web Configurator.
NWA5000 / WAC6500 Series User's Guide
81