Internet Access - ZyXEL Communications NWA5121-N User Manual

Advanced Suggestions
• Try to access the NWA/WAC using another service, such as Telnet. If you can access the NWA/
WAC, check the remote management settings to find out why the NWA/WAC does not respond to
HTTP.
• If your computer is connected wirelessly, use a computer that is connected to a LAN/ETHERNET
port.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
187.
I can see the Login screen, but I cannot log in to the NWA/WAC.
Make sure you have entered the user name and password correctly. The default password is 1234.
1
This fields are case-sensitive, so make sure [Caps Lock] is not on.
You cannot log in to the web configurator while someone is using Telnet to access the NWA/WAC.
2
Log out of the NWA/WAC in the other session, or ask the person who is logged in to log out.
Disconnect and re-connect the power adaptor or PoE power injector to the NWA/WAC.
3
If this does not work, you have to reset the device to its factory defaults. See
4
187.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload
new firmware.
See the troubleshooting suggestions for
configurator.

19.4 Internet Access

I cannot access the Internet.
Chapter 19 Troubleshooting
Ignore the suggestions about your browser.
NWA5000 / WAC6500 Series User's Guide
I cannot see or access the Login screen in the web
182
Section 19.6 on page
Section 19.6 on page