ZyXEL Communications NWA5121-N User Manual page 31

Figure 12 Object Reference
The fields vary with the type of object. The following table describes labels that can appear in this
screen.
Table 12 Object References
LABEL DESCRIPTION
Object Name This identifies the object for which the configuration settings that use it are displayed. Click
the object's name to display the object's configuration screen in the main window.
# This field is a sequential value, and it is not associated with any entry.
Service This is the type of setting that references the selected object. Click a service's name to
display the service's configuration screen in the main window.
Priority If it is applicable, this field lists the referencing configuration item's position in its list,
otherwise N/A displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration item has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click Cancel to close the screen.
CLI Messages
Click CLI to look at the CLI commands sent by the Web Configurator. These commands appear in a
popup window, such as the following.
Chapter 2 The Web Configurator
NWA5000 / WAC6500 Series User's Guide
31