Oven Base And Enclosure Material List - WILDWOOD OVENS &BBQ’S TOSCANO Installation Instructions Manual

OVEN BASE AND ENCLOSURE MATERIAL LIST

The following list is provided for your convenience only; the materials are not part of the oven kit.
List may vary depending on construction method.
MASONARY CONSTRUCTION METHOD
FOUNDATION AND SLAB
 Stakes and forms (for smooth finish melamine can be used to build forms)
 1500 Lb or higher strength concrete mix
 #4 Rebar
WALLS & SHELF
 Forms
 6" x 8" x 16" masonry blocks
 Masonry mortar
 #4 Rebar
 1500 Lb or higher strength concrete mix
 Optional alternative metal stand (contact a wildwood representative for prices)
ROOF
 Non-flammable roofing material
CHIMNEY SYSTEM
 1 Anchor plate for 6" pipe
 1 Double or triple wall chimney pipe (exact length will depend on individual installation
needs)
 1 Chimney cap with spark arrestor
 1 Tube high temperature sealant for anchor plate (withstanding up to 2000 degrees F)
IMPORTANT:
Oven shall only be installed with exhaust hoods constructed in accordance with NFPA 96 or
LISTED building heating appliance chimneys also LISTED as grease ducts.
* Material list for chimney system may vary depending on oven application. Interior installations may require
additional parts.
©Wildwood Ovens and BBQs LLC 2009
*
WWW.WILDWOODOVENS.COM
2
323.255.6587 All specifications subject to change without notice
Toscano
Wood Fired Oven
Installation Instructions
Version 4.0