Table of Contents
Advertisement
OVEN BASE AND ENCLOSURE MATERIAL LIST
The following list is provided for your convenience only; the materials are not part of the oven kit.
List may vary depending on construction method.
MASONARY CONSTRUCTION METHOD
FOUNDATION AND SLAB
Stakes and forms (for smooth finish melamine can be used to build forms)
1500 Lb or higher strength concrete mix
#4 Rebar
WALLS & SHELF
Forms
6" x 8" x 16" masonry blocks
Masonry mortar
#4 Rebar
1500 Lb or higher strength concrete mix
Optional alternative metal stand (contact a wildwood representative for prices)
ROOF
Non-flammable roofing material
CHIMNEY SYSTEM
1 Anchor plate for 6" pipe
1 Double or triple wall chimney pipe (exact length will depend on individual installation
needs)
1 Chimney cap with spark arrestor
1 Tube high temperature sealant for anchor plate (withstanding up to 2000 degrees F)
4 concrete screws. ¼" diameter and 2-1/4" long. Use 3/16" drill bit.
IMPORTANT:
Oven shall only be installed with exhaust hoods constructed in accordance with NFPA 96 or
LISTED building heating appliance chimneys also LISTED as grease ducts.
*
Material list for chimney system may vary depending on oven application. Interior installations may require
additional parts.
©Wildwood Ovens and BBQs LLC 2009
*
WWW.WILDWOODOVENS.COM
2
323.255.6587
All specifications subject to change without notice
Roma
Wood Fired Oven
Installation Instructions
Version 4.0
Advertisement
Table of Contents
