Advertisement
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to enlarge or reduce the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you
can't move the projector, use the horizontal keystone slider to correct
the image.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
or
, you may have placed the projector
or
button on the projector to
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
Access projector
Turn off projector
For more information on using the remote control, see the online User's Guide.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•
If you're using a Windows
that lets you display on an external monitor. It may be labeled CRT/LCD or
have an icon such as
pressing it (such as Fn + F7). Wait a moment for the display to appear.
•
If you're using a Mac laptop, open System Preferences and select
or
,
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don't have
a User's Guide icon, you can install it from the projector CD or go to the Epson
website, as described on the back of this sheet.
Telephone support services
To use the Epson
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
to 4
, Pacific Time, Saturday. Days and hours of support are subject to change
pm
without notice. Toll or long distance charges may apply.
on and off
menus
display
®
laptop, press the function key on your keyboard
. You may have to hold down the Fn key while
®
PrivateLine
®
Support service, call (800) 637-7661. This service
to 8
, Pacific Time, Monday through Friday, and 7
am
pm
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems
am
Advertisement
