Setting The Time-Lapse Options - Silvercrest SCW 5 A1 User Manual And Service Information

SilverCrest SCW 5 A1

Setting the time-lapse options

To set the time-lapse options, proceed as follows:

Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the LAPSE menu is highlighted.
Press the record button [9] to open the LAPSE menu.

Press the On/Off/Mode button [2] to select the desired option and then press the
record button [9] to confirm. The following options are available:

To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
110 - English
Use this menu to select
lapse recording as a video or select
save it as a pictures series.
Use this menu to select the recording
interval. The following settings are available:
"1 SEC" (not for picture series), "3 SEC", "5
SEC", "10 SEC", "30 SEC" and "60 SEC".
Select this option to exit the LAPSE menu
without making any changes.
to save the time-
to