Safety Precautions Lightning In case of a storm and lightning or when Read the following recommended safety going on holiday, disconnect the power precautions carefully for your safety. cord from the wall outlet. Power Source Replacement Parts The TV set should be operated only from a 220-240V When replacement parts are required, make sure that AC, 50 Hz outlet.
Licence Notifi cation (optional) Information for users in EU Countries is a trademark of SRS Labs, Inc. This symbol on the product or on its packaging means TruSurround technology is incorporated under license that your electrical and electronic device should be from SRS Labs, Inc.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency features of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons No function Play (in Media Browser mode) Programme recording Rapid reverse (in Media Browser mode) No function Mono/Stereo - Dual I-II / Current Language (*) / Play preview (in Media Browser mode) Image size / Zooms videos (in Media Browser video mode) SCREEN LANG...
LED TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu.
RF Input connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages. PC Input is for connecting a personal computer to the TV set.
Switching On/Off First Time Installation To Switch the TV On IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time • Connect the power cord to the 220-240V AC 50 Hz. installation. Then the standby LED lights up. (The LED will blink •...
To select the “Yes” or “No” option, highlight the item by Connecting to a DVD Player using “ ” or “ ” buttons and press OK button. If you want to connect a DVD player to your LCD Afterwards, the following OSD will be displayed on TV, you can use connectors of the TV set.
Connecting the LED TV to a Using Side AV Connectors You can connect a range of optional equipment to your LED TV using side connectors of the TV. For displaying your computer’s screen image on your • For connecting a camcorder or camera , you should LED TV, you can connect your computer to the TV set.
CAUTION ! Using USB Inputs • Quickly plugging and unplugging USB devices, USB Connection is a very hazardous operation. Especially, do not • You can connect a USB hard disk drive or USB repeatedly quickly plug and unplug the drive. This memory stick to your TV by using the USB inputs may cause physical damage to the USB player and of the TV.
• Multipartiton support is available. Maximum 2 Viewing Main Menu different partitions are supported. If disk have more • Press the “ ”/“ ” button at the same time to then 2 partition, crash may occur. First partition of view main menu. In the Main menu select sub-menu usb disk is used for PVR ready features.
Viewing Electronic Programme EPG Screen Two Guide (EPG) You can view the electronic programme guide (EPG) to view information about available programmes.To view the EPG menu please press GUIDE button on the remote control. • Press “ ”/“ ” buttons to navigate through channels. •...
To cancel an already set reminder, highlight that (RECORD): the TV will start to record the programme and press the OK button. Then select selected progamme. You can press again to stop “Delete Timer” option. The timer will be cancelled. the recording.
• Press OK button to proceed. Use “ ” or “ ” button Manual Tuning to set Fine Tune. When fi nished, press OK button HINT: This feature can be used for direct broadcast again. entry. Managing Stations: Channel List •...
Deleting a Channel Managing Stations: Favourites You can press GREEN button to tag/untag all You can create a list of favourite programmes. channels; YELLOW button to tag/untag channel. • Press MENU button to view main menu. Select • Select the channel that you want to delete and select Channel List item by using “...
On-Screen Information You can press INFO button to display on-screen information. Details of the station and current programme will be displayed on the information banner. Select a device by using “ ” or “ ” button and press Viewing Videos via USB The information banner gives information on the channel selected and the programmes on it.
Press RETURN (Exit) button to switch back to previous menu. Viewing Photos via USB When you select Photos from the main options, available image fi les will be fi ltered and listed on this screen. Play ( button) : Plays all media fi les starting with the selected one.
Timeshift Recording IMPORTANT: To record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. •...
• Play from start: Plays the recording from the beginning. • Resume: Recommences the recordings. • Play from offset: Specifi es a playing point. Note: Viewing main menu and menu items will not be available during the playback. Press (STOP) button to stop a playback and return Press (STOP) button to cancel instant recording.
Subtitle The top and bottom of the picture are slightly cut off. Cinema This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. This zooms up the wide picture (16:9 aspect ratio) to the full screen. Note: You can shift to screen up or down by pressing “...
displaying the normal broadcast. Press OK button to Note: When Game Mode is on, some items in the quit the demo mode. Picture Settings menu will be unavailable. Picture Zoom:Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. Reset: Resets the picture settings to factory default settings.
•When headphones are connected to the device, the Confi guring Sound Settings internal speakers of the TV will mute and the volume of Sound settings can be confi gured according to your the headphones can be adjusted via sound seetings/ personal preferences.
Other Settings: Displays other setting options of Confi guring Language the TV set. Preferences Using a Conditional Access You can operate the TV’s language settings using Module this menu. IMPORTANT: Insert or remove the CI module only Press MENU button and select the Settings icon by when the TV is SWITCHED OFF.
Language Settings Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Press the OK button to view more options. (*) If you set Country option as UK in the fi rst time In the confi...
• Use “ ” or “ ” button to set. The timer can be Recording Confi guration programmed between Off and 2.00 hours (120 Select Recording Confi guration item in the Settings minutes) in steps of 30 minutes. menu to confi gure recording settings. The following Setting Programme Timers menu is displayed for recording confi...
Hard Disk Info Confi guring Source Settings To view the details about the USB disk, highlight Hard Allows you to enable or disable selected source Disk Info by using “ ” or “ ” key and press OK. USB options. The TV will not switch to the disabled source disk information will be displayed: options when SOURCE button is pressed.
Scan Encrypted: When this setting is on, search Use “ ” or “ ” button to select Standby Search and process will locate the encrypted channels as well. If then press “ ” or “ ” button to set this setting as On or it is set as Off, encrypted channels will not be located Off.
• The aspect ratio (picture shape) when watching a Teletext channel with just digital teletext broadcasting is the same The Teletext system transmits information such as as the aspect ratio of the picture viewed previously. news, sports and weather on your TV. Note that if the •...
USB Is too Slow: If “USB is too slow” message is Tips displayed on the screen while starting a recording, Screen Care: Clean the screen with a slightly damp, try restarting the recording. If you still get the same soft cloth. Do not use abrasive solvents as they may error, it is possible that your USB disk does not meet damage the coating layer of the TV screen.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1360 x 768. Source Supported Signals Available The following table is an illustration of some of the typical video display modes.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i 480p 576i 576p 720p 1080i 1080p Appendix D: Supported File Formats for USB Mode File Format Remarks...
Appendix E: Software Upgrade • Your TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, the TV looks at the available channels stored in your settings. So the before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...
Need help?
Do you have a question about the 55S6040-M and is the answer not in the manual?
Questions and answers