Honeywell Xenon 1910 User Manual page 17

Note: The power supply must be ordered separately, if needed.
4. If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the
cordless base and the base sits flat on a horizontal surface. If you are connecting a CCB02-100BT Base, see
a CCB02-100BT Base
5. Turn the terminal/computer power back on. The scanner beeps.
6. Verify the scanner or cordless base operation by scanning a bar code from the
manual. The scanner beeps once. If using a Granit scanner, it also vibrates.
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with a USA keyboard. A carriage return (CR)
suffix is added to bar code data.
CCB01-010BT Base Keyboard
Wedge Connection:
CCB02-100BT Base Keyboard
Wedge Connection:
on page 1-9.
Sample Symbols in the back of this
Mounting
1 - 5