Driver Installation - StarTech.com PEX1000MMSC2 Instruction Manual

4. Gently insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
NOTE: If installing the card into a small form factor/low profile system, replacing
the pre-installed full profile bracket with the included low profile installation bracket
may be necessary.
5. Place the cover back onto the computer case.
6. Insert the power cable into the socket on the power supply and reconnect all
other connectors removed in Step 1.

Driver Installation

Windows
NOTE: The card may auto-install using native drivers, however it is recommended
to use the procedure below to update to the latest driver version.
1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,
cancel/close the window and insert the included Driver CD into the computer's
CD/DVD drive.
2. If AutoPlay is enabled, select the "Open folder to view files" option when the
dialog appears.
3. Open the "PEX1000MMSC2_SFP2_Driver" folder, and run the "Setup.exe" application
within the appropriate Operating System folder for the system you are using.
Instruction Manual
4