Table of Contents
Advertisement
8
en | Short information
2
Short information
The PMX-2P500 class-D amplifier is a 2 ✕ 500 W professional audio amplifier for evacuation
purposes. It can be operated from both the mains and a DC supply. The output voltage is
galvanically insulated and is constantly monitored for ground fault. An energy-saving mode and
temperature-controlled fans reduce energy consumption and noise levels. The control and
monitoring functions are performed via CAN bus. This amplifier is designed for operation in an
emergency evacuation system. It can be used as system amplifier or in stand-alone mode. The
amplifiers are usually controlled via a controller and configured using IRIS-Net.
The power amplifier has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
The power amplifier is processor-controlled and equipped with extensive monitoring
functions. Line monitoring for the CAN bus and for audio transmission allows line
interruptions and short-circuits to be detected and indicated to the user.
18-Jun-2015 | 04 | F01U306848
Floating 100 V or 70 V power outputs
High efficient amplifier blocks in class-D technology
Outputs idling and short circuit-protected
Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
Electronically balanced inputs
Temperature monitoring function
Pilot tone and ground fault monitoring function via PMX-4CR12 controller or PMX-4R24
router
Processor control of all functions
Monitoring of the processor system via watchdog circuit
Non-volatile FLASH memory for configuration data
Internal monitoring function
Integrated audio relays
Line monitoring function
Operation manual
Promatrix 6000 Amplifier
Advertisement
Table of Contents
