Table of Contents
Advertisement
LU 253335051-B RTI90-320_500 T2 HD UK.book Page 10 Jeudi, 13. octobre 2011 2:50 14
RTI90-320/500 T2 HD UK
Interference
Do not place the recorder near appliances that may cause electromagnetic interferences (for example
loudspeakers). This could affect recorder operation and distort the picture or sound.
Hard disk
This unit contains a hard disk drive. Please wait for the unit to go into standby mode before unplugging
and moving it.
Never cut off the electrical supply while the disk is reading or writing, you may lose data and/or damage
the hard disk.
USB Storage devices
Please wait until the recorder or the multimedia file application is in standby mode before disconnecting
your storage devices. Else, you could lose data or damage your storage device.
When connecting a USB peripheral device, respect the way of insertion and never use force. You may
damage your peripheral device and/or the appliance.
Cleaning the recorder
The outer casing of the recorder can be cleaned with a soft and dry cloth. Do not use any type of
abrasive pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the
surface of the recorder.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RTI90-320 T2 HD UK and is the answer not in the manual?
Questions and answers
box stays on standby only
The SAGEMCOM RTI90-320 T2 HD UK box may stay on standby only if the antenna signal is not correctly detected or if the receiver is not properly connected. It is recommended to check all connections and ensure the antenna signal is correctly received.
This answer is automatically generated