Running Your First Installation; Language Selection; Country Selection; Video Settings - SAGEMCOM RTI90-320 T2 HD UK User Manual

LU 253335051-B RTI90-320_500 T2 HD UK.book Page 22 Jeudi, 13. octobre 2011 2:50 14
RTI90-320/500 T2 HD UK

6. Running your first installation

Once the recorder is physically connected, you need to go through the setup procedure to get your
FREEVIEW channels.
1. Switch on your TV.
2. Press the Standby
The first installation screen should appear.

Language Selection

3. Select your language with the
Press the key to continue.

Country Selection

4. Select your country with the
Press the key to continue.

Video Settings

5. Select the settings better suited to your needs.
Use the up and down keys to highlight a setting,
use the left and right arrows to select a value.
• HDMI Output: If your TV set is connected to
the recorder with an HDMI cable, select YES. If
you have a standard TV set, select NO.
• TV Format: select the display mode for your
TV: 16/9 (widescreen TV), 4/3 (Traditional TV)
or Auto (programme format will be respected -
16:9 or 4:3).
• TV SCART: select the video standard (RGB,
CVBS) for the TV output.
6. Press the key to continue.
button on your remote control to wake the recorder up from standby mode.
or key.
or key.
22