LU 253335051-B RTI90-320_500 T2 HD UK.book Page 54 Jeudi, 13. octobre 2011 2:50 14
RTI90-320/500 T2 HD UK
Symptom
A black screen (no video)
appears at the end of a
recording.
For any other problem.
Updating the software
The receiver automatically downloads 'over the air' new software and services when they become
available.
If a problem is encountered during the download, the receiver displays on its front panel an error code.
Error code
Er00
Er02
Er05
Er10
Er11
For any other error messages, contact our customer services team on 08450 900 316.
• Some channels stop their broadcast with a fixed image or no
video. When a recording ends on such programmes, the video
recording stops but the time counter continues until the end of
the scheduled recording time. Make sure that you set your
manual recordings with the correct end time.
• Perform a default factory reset (see section Resetting the
receiver, page 50).
Meaning/Action
The software currently in the receiver is identical to the software
available.
Receiver updating is therefore not necessary.
• The signal quality does not enable the software to be correctly
acquired. Press the OK key to continue the process.
• Check the signal strength and quality (see section Antenna
Signal Information, page 51).
54
Action