Batteries; Interference; Cleaning The Receiver - SAGEMCOM DS186 HD Freesat User Manual

UG 253442997-C DSI86 HD Freesat UK.book Page 9 Jeudi, 13. octobre 2011 10:30 10
• Take care not to allow liquids or metal objects to enter the receiver through the ventilation slots.
• Avoid reconnecting the receiver after it has been subjected to large changes in temperature.
• The receiver must be disconnected from mains supply (from the power outlet or rear panel) before
any modification of connection between TV, VCR or dish.
• In the event of a storm, it is advisable to unplug the dish. Even if the receiver and the television set
are disconnected from the power supply, lightning can still damage them.
• If you hear unusual noise coming from the mains power socket or from the power cord or adapter,
disconnect immediately the power cord from the mains power socket in accordance with all the
precautions of use, you risk getting an electric shock, and contact your retailer.
• Never connect the receiver to a mains power socket which is loose, shows signs of wear or
damage, you risk getting an electric shock.
• Never touch the power cord with wet hands. You risk getting an electric shock.
• When connecting or disconnecting the power cord, always take hold of the plug without pulling on
the cord. A damaged cord presents a potential risk of fire or electric shock. Never pull the power
cord when disconnecting from the mains power socket.
• Never place objects on the power cord, and never pull on it or fold it. This may cause a risk of fire or
electric shock. Ensure that the receiver never lies on the power cord or any other cables.
• Never place objects on the power adapter, never step on it or roll over it with a rolling device. You
risk damaging the power adapter and creating a risk of fire or electric shock.
• Ensure the receiver is placed on a flat and stable surface, placing it incorrectly may lead to the
power cord being disconnected. This may cause a risk of fire or electric shock.
• Always connect the power adapter cord to the receiver first, then connect the power cord to the
power adapter, and finally connect the power cord to the mains power socket. By not observing the
order indicated, you risk getting an electric shock.
• Ensure the power cord is correctly connected to the power adapter, and that it is firmly inserted in its
slot. It is important that you push the connector into its slot. There is a risk of fire or electric shock in
case of incorrect connection.
• Always keep the power cord and power supply unit out of the reach of children or domestic animals.
• Only personnel approved by the manufacturer can repair the receiver. Failure to comply with these
safety precautions will invalidate the guarantee.
• Have a specialised installer perform all connections if you want to use cables that are not provided
with the receiver.

Batteries

Batteries are easily swallowed by young children. Do not allow young children to play with the remote
control.
Always keep batteries away from excessive heat sources such as sun rays, fire or similar sources.
To avoid damaging the remote control, only use identical batteries or batteries of equivalent type. The
batteries provided are not rechargeable.

Interference

Do not place the receiver near appliances that may cause electromagnetic interferences (for example
loudspeakers). This could affect receiver operation and distort the picture or sound.

Cleaning the receiver

The outer casing of the receiver can be cleaned with a soft and dry cloth. Do not use any type of
abrasive pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the
surface of the receiver.
DSI86 HD freesat
9