SAGEMCOM RTI90-320 T2 HD UK User Manual page 50

LU 253335051-B RTI90-320_500 T2 HD UK.book Page 50 Jeudi, 13. octobre 2011 2:50 14
RTI90-320/500 T2 HD UK
Setting network
This feature allows you to define your network
parameters:
1. Go to Receiver settings > Network settings.
2. Define your Ethernet configuration:
• Manual: in this case, enter the figures of each
address required, or
• DHCP configuration.
Resetting the receiver
Note
If you reset the default settings, you lose the channels and settings you made.
This operation does not erase the recordings saved in the recording list.
1. Go to Receiver settings > Reset factory default.
2. Enter your parental code and press the
A warning message appears.
3. To cancel the operation, press the
To confirm the reset, press the
Once the default settings are restored, the receiver
installation screen is displayed. You can then
reconfigure your receiver (see section Running your
first installation, page 22).
key.
or key.
[Confirm] key.
50