Advertisement
Quick Links
Instruction Manual
Airbrush Diaphragm Compressor AS06
34200
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 34200
Summary of Contents for WilTec 34200
- Page 1 Instruction Manual Airbrush Diaphragm Compressor AS06 34200 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon- dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the cable © by WilTec Wildanger Technik GmbH Item 34200 Page 3 http://www.WilTec.de...
- Page 4 When the compressor is connected by the hose to the airbrush gun, it can be connected to the mains and switched on. • The maximum pressure is displayed the pressure gauge, the operating pressure can be ad- justed by the pressure regulator. © by WilTec Wildanger Technik GmbH Item 34200 Page 4 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
-
Page 5: Troubleshooting
Valve destroyed because of too Replace valves or cylinder cover. long a work with too high a pres- sure. © by WilTec Wildanger Technik GmbH Item 34200 Page 5 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de... - Page 6 Valve spring Cable and plug Bearing Screw (6×) Screw Rear cover Diaphragm fixing plate Bearing Cushion Diaphragm Rubber pad (4×) Interrupter Rotor Pair of cable sleeves © by WilTec Wildanger Technik GmbH Item 34200 Page 6 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
- Page 7 German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.
Need help?
Do you have a question about the 34200 and is the answer not in the manual?
Questions and answers