Table of Contents
Advertisement
ADJUSTING THE EAR STEMS
The soft rubber ear stems on Jet's frame can be adjusted to
the exact contour of your head for a completely secure and
comfortable fit.
ADJUSTING THE NOSEPIECE
Adjust the nosepiece so that Jet sits comfortably on your
face, with the display just below your line of sight. If you
find that Jet is sitting too high or too low, you can widen
or narrow the nosepiece accordingly.
ADJUSTING THE DISPLAY
Located on the underside of Jet's engine is the display
control column, which allows you to adjust Jet's display
for optimal visibility.
Before adjusting the display, make sure you are wearing
Jet and that the display is on. Then, grip the front of
the engine tightly between your thumb and forefinger,
ensuring your thumb is on the display control column.
To adjust the display's vertical position, push the display
control column forward and back. You should see
the image move up and down. To adjust the display's
horizontal position, press firmly on the display control
column while twisting it on its axis. You should see the
image move from side to side.
WARNING:
• Do not attempt to twist the display control column all the way around. The display control column only needs to rotate
a few degrees to adjust the display's horizontal position. It is not designed to rotate further.
• Jet should not be worn over or under prescription glasses.
• Consult your doctor before wearing Jet if you have any allergies to plastic.
• Adjust Jet's fit so that neither the engine nor the battery is in direct contact with your skin. Failure to do so may cause bruising.
• Do not wear Jet if the lens is broken. Doing so may cause facial injury.
• Using Jet in extreme temperatures (above 104
• Jet is resistant to rain and sweat but is not waterproof. Avoid exposure to very heavy and prolonged rain, as it might damage
the device.
F/40
C or below -4
F/-20
C) may damage your device permanently.
0
0
0
0
Push forward and back
Push in and twist
3
Hide quick links:
Advertisement
Table of Contents
