Maintenance; Eyewear And Cosmetic Surfaces; Storing Your Device; Get Started / Activate Your Jet - Recon JET Owner's Manual

MAINTENANCE

Your new Recon Jet is supplied with a woven microfiber cloth specially designed for storage and cleaning purposes.

EYEWEAR AND COSMETIC SURFACES

Eyewear and cosmetic surfaces should be wiped with the supplied microfiber cloth and cleaned with fresh water.
Avoid harsh detergents or cleaning fluids. After cleaning Jet, let it dry in a well-ventilated place or gently blot it dry
using the supplied cloth.
ELECTRICAL CONTACTS (COPPER PINS AND PADS)
If water or moisture gets on the electrical contacts between the lens and the battery and/or engine, power off your Jet, remove
the battery and/or engine, and dab the contacts dry with a tissue or soft cloth. Store your Jet with the battery and/or engine
removed to allow the moisture to dry off.
Periodic cleaning of the contacts with rubbing alcohol will ensure there is no buildup of contaminants. If you notice corrosion,
you can clean it off using rubbing alcohol and a soft cloth or cotton swab.
Note: Be sure to inspect the contacts before charging, as well.

STORING YOUR DEVICE

Before storing Jet for an extended period of time, make sure the battery is fully charged and detached from the frame.
This will help prolong the life of your battery. Always store Jet in a cool, dry place. The ideal long-term storage temperature
for Jet is between 50°F and 68°F (10°C and 20°C).
WARNING:
• Storing Jet in suboptimal conditions may shorten the battery life and, in some cases, damage Jet permanently.
• Always store your Jet in its original case. Failure to do so may cause the frame to warp.

GET STARTED / ACTIVATE YOUR JET

Before taking your Jet for that first run or ride, you will need to activate it and link it to your Recon Engage account.
To get started, first visit reconinstruments.com/getstarted.
You will be walked through the following steps to activate and link your Jet:
1. Register for a Recon Engage account.
2. Download and install the Recon Uplink desktop app on your computer.
3. Power on your Jet and connect it to your Mac or PC.
4. Link Jet to your Engage account. You will be prompted to do this by Recon Uplink.
5. Once you have installed the latest software version, you're done. Start piloting your Jet!
Keep track of your activities with the Recon Engage website and Recon Engage mobile app. Check your activity history,
compare your all-time bests, track your friends, and share your unique experiences.
6