SENSORS
CONNECT AN ANT+ DEVICE
Jet supports the following ANT+
for third-party device connectivity:
Heart Rate
Monitors
Bike Power
(including CTF)
To connect an ANT+ TM sensor to your Jet:
1. Turn the ANT+ device on
2. On Jet:
a. Go to Settings > Sensors.
b. Select Add Sensors.
c.
Choose the sensor type you would like to connect.
d. Select the sensor from the Sensor Found screen to connect and save it.
e. Jet will automatically connect to your ANT+ sensors when you go to your Metrics Dashboard.
profiles
TM
Bike Speed
Bike Cadence
Bike Speed
& Cadence
12