5. Press the optical drive release button
out of the optical drive bay.
Figure 22. Removing the optical drive
6. To install a new optical drive, slide the new optical drive into the optical drive bay until it snaps into
position.
Figure 23. Installing the optical drive
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 75.
Replacing the converter board
Attention:
Do not open your computer or attempt any repair before reading and understanding "Important safety information"
on page v.
This section provides instructions on how to replace the converter board.
1
toward the top of the computer, and then slide the optical drive
.
Chapter 5
Installing or replacing hardware
53