Chapter 1. Product Overview; Features - Lenovo ThinkCentre M93z 10AC User Manual

Chapter 1. Product overview

This chapter provides information about the computer features, specifications, software programs provided
by Lenovo, and locations of connectors, components, parts on the system board, and internal drives.

Features

This section introduces the computer features. The information covers a variety of models.
To view the information about your specific model, do one of the following:
• Go into the Setup Utility program by following the instructions in Chapter 7 "Using the Setup Utility
program" on page 85. Then, select Main ➙ System Summary to view the information.
®
• On the Microsoft Windows
to view the information.
• On the Microsoft Windows 8 or Windows 8.1 operating system, go to the desktop and move your pointer
to the top-right or bottom-right corner of the screen to display the charms. Then click Settings ➙ PC
info to view the information.
Microprocessor
To view the microprocessor information of your computer, do the following:
• On the Windows 7 operation system, click Start, right-click Computer, and select Properties to view
the information.
• On the Windows 8.1 operating system, go to the desktop and move your pointer to the top-right or
bottom-right corner of the screen to display the charms. Then click Settings ➙ PC info to view the
information.
Memory
Your computer supports up to two double data rate 3 small outline dual inline memory modules (DDR3
SODIMMs).
Internal drives
• Optical drive: slim DVD-ROM , slim Rambo, or Blu-ray (optional)
• Hybrid drive
• Serial Advanced Technology Attachment (SATA) hard disk drive
Note: Your computer only supports SATA 3.0 devices. For more information, see "Locating parts on the
system board" on page 16.
Display
• 23-inch antiglare LCD panel
Video subsystem
• Integrated graphics for a Video Graphics Array (VGA)-in connector and a DisplayPort
• Graphics processing unit (GPU), available in some models
Audio subsystem
© Copyright Lenovo 2013, 2014
®
7 operation system, click Start, right-click Computer, and select Properties
®
-out connector
1