Adjusting The Frame Stand - Lenovo ThinkCentre M93z 10AC User Manual

15
Rear I/O assembly slot
17
Touch panel control board connector*
19
Serial connector
21
SATA power connector
23
Converter board power connector
25
GPU fan connector (optional)
27
Microprocessor fan connector
Note: * denotes that the components connecting to

Adjusting the frame stand

Your computer might come with a frame stand that you can use to adjust the computer to your comfortable
position. Pull the stand open and adjust the position of the computer at an angle between 10° and 45°
as shown in the following illustration.
Note: The frame stand is available only in some models.
CAUTION:
Ensure that the angle is at least 10° from the vertical; otherwise, the computer might be unstable
and fall over.
Figure 5. Adjusting the frame stand
16
Front LED connector
18
Front control panel connector
20
Keyboard and mouse cable connector
22
SATA 3.0 connector (for connecting the hard disk drive)
24
SATA 3.0 connector (for connecting the optical drive, the
secondary hard disk drive, or the secondary solid-state drive)
26
14-pin power connector
6 , 12 , and 17 are only available in some models.
.
Chapter 1 Product overview
17