10
Card reader connector
11
Internal speaker connector
12
ExpressCard connector*
13
Display connector
14
mSATA solid-state drive slot (also can support
mini PCI Express x1 card function with limitation)
Note: * denotes that the components connecting to
Adjusting the frame stand
Your computer might come with a frame stand that you can use to adjust the computer to your comfortable
position. Pull the stand open and adjust the position of the computer at an angle between 10° and 45°
as shown in the following illustration.
Note: The frame stand is available only in some models.
CAUTION:
Ensure that the angle is at least 10° from the vertical; otherwise, the computer might be unstable
and fall over.
Figure 5. Adjusting the frame stand
24
SATA 3.0 connector (for connecting the optical drive, the
secondary hard disk drive, or the secondary solid-state drive)
25
GPU fan connector (optional)
26
14-pin power connector
27
Microprocessor fan connector
6
12
17
,
, and
are only available in some models.
.
Chapter 1
Product overview
17