Installation Of Optional Boards - Sony HDW-F500 Maintenance Manual

1-7. Installation of Optional Boards

1-7-1. HKDV-502
This board allows you the following functions.
. To convert an effective scanning line number from 1035 to 1080 or from 1080 to 1035.
. To automatically switches between processing for movie and still portions of a picture, thus improving
the vertical resolution during slow-motion playback.
Components
DPR-105 board
Fixing screws PSW3 x 6 : 2 pieces
Propping shaft : 2 pieces
Installing Procedure
n
Begin this installation to turn the power off.
1. Remove the upper lid.
2. Remove the screw, then remove the board retainer (L) plate of HDW-F500.
3. Disconnect the coaxial harnesses (marked with A to H) from the DIF-91A board, then remove the
board from HDW-F500. (Refer to Section "2-10-1. Removing/Installing the Plug-in Board".)
4. Remove six screws (PWH2.6 x 5) and two harness holders of the DIF-91A board, then remove the
shield plate.
HDW-F500E MMP1
Board retainer (L) plate
Coaxial harness
Power
Shield plate
DIF-91A board
Screw
Harness holders
PWH2.6 x 5
PWH2.6 x 5
1-7. Installation of Optional Boards
1-19