Installing The Backplane - Dell MD1400 Owner's Manual

Figure 23. Removing and installing the backplane
1. screws (5)
3. backplane

Installing the backplane

1. Align the holes on the backplane with the holes on the enclosure.
2. Tighten the captive screw to secure the backplane to the chassis.
3. Replace the screws that secure the backplane to the chassis.
4. Align the slots on the EMM or power supply cage with the tabs on the chassis.
5. Push the EMM or power supply cage toward the front of the enclosure.
6. Replace the screws that secure the EMM or power supply cage to the chassis.
7. Install the control panel. See
8. Install the power supply or cooling fan modules. See
fan module.
9. Install the hard disk drives. See
10. Connect all the cables to the enclosure.
11. Turn on the enclosure and the host server.
Installing the control panel.
Installing a hard disk drive.
2. captive screws (2)
Installing an AC power supply unit or cooling
31