Available Custom Picture Settings - Canon XF300 Instruction Manual

Custom Picture Settings

Available Custom Picture Settings

The following are the available settings. Even if no custom picture file is
selected, the default settings are still applied to the picture.
Gamma
The gamma curve changes the overall look of the image. (Default:
[Normal 1]).
[Normal 1] to [Normal 4]: These settings are suitable for viewing the image
[Cine 1] or [Cine 2]:
Black
Controls the black level and color cast of blacks.
Master Pedestal
The master pedestal increases or decreases the black level. Higher
settings will make dark areas brighter but decrease contrast. This
setting can be adjusted from -50 to 50. (Default: 0)
Master Black
Corrects color cast in blacks.
[Red]: -50 to 50 (Default: 0)
[Green]: -50 to 50 (Default: 0)
[Blue]: -50 to 50 (Default: 0)
Downloaded From VideoCamera-Manual.com Manuals
on a TV monitor. Highlights in [Normal 2] are
brighter than those of [Normal 1]. Dark tones in
the lower part of the gamma curve for [Normal
3] (ITU-R BT.709 standard) and [Normal 4] are
more pronounced than those of [Normal 2].
Use [Cine 1] for a gamma curve that results in a
picture with a cinema-like feel and cinema-like
tones. [Cine 2] has softer contrasts than does
[Cine 1] but is also suitable for creating a
cinema-like picture.
Gamma
Normal 2/3/4
Input
Cine 1
Cine 2
Normal 4
Normal 3
Normal 1/2
Customization
4
119