Adding Shot Marks While Recording - Canon XF300 Instruction Manual

3

Adding Shot Marks while Recording

102
Downloaded From VideoCamera-Manual.com Manuals
Adding Shot Marks while Recording
Recording
When recording, you can flag an important shot in a clip by adding a
"shot mark" (n). There are two types of shot marks, shot mark 1 (c) and
shot mark 2 (d), and you can add either or both types to a single clip.
When the camcorder is in
marks (0 143). You can also display an index screen of all the shot
marks (0 141), allowing you to find a particular scene in a clip more
quickly.
Operating modes:
To add a shot mark to a clip while recording, you must first set in advance
an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]. You can
also press the SHOT1 button on the wireless controller to add the c
mark.
1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]
(0 113).
• To add both shot marks, set one assignable button to [Add Shot Mark 1]
and another assignable button to [Add Shot Mark 2].
2 While you are recording, press the assignable button at the
beginning of the shot you wish to mark.
• A message indicating the short mark will appear and the selected shot
mark will be added to the current frame of the clip.
• You can press the button again to add another shot mark. Up to 100
shot marks (c and d marks combined) can be added to a single clip.
NOTES
• There may be up to a 0.5 second delay from when you press the
button to when the camcorder adds the shot mark.
• When you are using interval recording or frame recording mode, you
cannot add shot marks to a clip.
• When a clip contains either shot mark, n will appear next to the clip's
thumbnail in the playback index screen.
mode, you can add or delete shot