Removing And Attaching The Terminal Covers; Using The Wireless Controller - Canon XF300 Instruction Manual

Preparing the Camcorder

Removing and Attaching the Terminal Covers

Remove the covers for the following terminals in order to access them.
• HD/SD SDI terminal*
• GENLOCK and TIME CODE terminals*
• VIDEO 2 terminal
• W (headphone) and REMOTE terminals
* b only.
Removing the Terminal Covers
1 Open the terminal cover and pull it out.
2 Grasp the strip connecting the terminal cover to the camcorder and
pull.
This step is not necessary for the covers for the HD/SD SDI,
GENLOCK, TIME CODE and VIDEO 2 terminals.
Attaching the Terminal Covers
Insert the connecting strip into the opening to attach the terminal cover.
NOTES
• If the connecting strip is difficult to grasp, use a pair of tweezers or
similar tool.

Using the Wireless Controller

Inserting the Battery
Insert the supplied CR2025 lithium button battery into the wireless
controller before use.
1 Press the tab in the direction of the arrow ( ) and pull out the battery
holder ( ).
2 Place the lithium button battery with the + side facing up ( ).
3 Insert the battery holder ( ).
Activating the Wireless Controller
Operating modes:
1 Open the [Wireless Controller] submenu.
[J Other Functions]
2 Select [On] and then press SET.
Downloaded From VideoCamera-Manual.com Manuals
• HD/SD COMPONENT OUT terminal
• AV terminal
• USB and HDMI OUT terminals
[Wireless Controller]
Preparations
[J Other Functions]
[Wireless Controller]
[On]
2
37