Using The Menus; Selecting An Option From The Menu - Canon XF300 Instruction Manual

2

Using the Menus

Joystick/SET button
Push the joystick to move the orange selection frame in the
menu. Then, press the joystick itself (SET button) or the SET
button next to the SELECT dial to select the menu item
indicated by the orange selection frame.
CANCEL button
Press to return to the previous menu or to
stop some operations that are in progress.
30
Downloaded From VideoCamera-Manual.com Manuals
Using the Menus
Preparations
In
the menu for general settings, which opens after pressing the MENU
button. In
general settings or SET to open the clip menu for clip operations. For
details about the available menu options and settings, refer to Menu
Options (0 169).
Operating modes:

Selecting an Option from the Menu

The following is a step-by-step explanation of how to select an option
from the menu. In the procedures throughout the rest of this manual,
opening and closing the menu is assumed and not included in the
procedure.
1 Press the MENU button.
• The menu opens with the orange selection frame indicating the menu
item that was selected the previous time the menu was closed
(unless the camcorder was turned off).
2 Push the joystick up/down or turn the SELECT dial to select the
desired submenu.
3 Push the joystick right or press SET.
• The orange selection frame will appear on a menu item in the
submenu.
• Press the CANCEL button, push the joystick left, or select [a] to
return to the previous submenu.
mode, many of the camcorder's functions can be adjusted from
mode, press the MENU button to open the menu for
MENU button
Press to open the menu and then
press again to close the menu after
adjusting desired settings.
CANCEL button
SELECT dial
Turn the dial to move the orange selection
frame up or down in the menu.