Clock Setting; Audio; Radio Operation - Fiat 500x 2016 User Manual

ELECTRONICS

Clock Setting

1. Push the Menu button at the bottom of the radio, and push the Enter/Browse button
for System Settings. Next, select the Time and Format setting and then select Set Time
by pushing the Enter/Browse button.
2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pushing the Enter/
Browse button to move to the next entry. You can also select 12hr or 24hr format by
turning the Tune/Scroll knob, then pushing the Enter/Browse button on the desired
selection.
3. Once the time is set push the "Back" button to exit the time screen.

Audio

• Push the AUDIO button on the radio faceplate.
The Audio Menu shows the following options for you to customize your audio settings.
Treble, Mid, Bass, Fade, Balance, Speed Adjusted Volume, Loudness
• Select the desired setting to adjust, then push the ENTER/BROWSE button. Turn the
TUNE/SCROLL knob to adjust the setting + or - 9. Push the "Back" button when
done.

Radio Operation

Seek Previous/Next Buttons
• Push the up or down buttons to seek through radio stations in AM, FM or SXM
bands.
• Hold either button to bypass stations without stopping.
Store Radio Presets Manually
The Radio stores up to 18 presets in each of the Radio modes. Push the A-B-C button
on the faceplate to select the A, B or C preset list. The Presets are available for all Radio
Modes, and are activated by pushing any of the six Preset buttons.
To store a radio preset manually, follow the steps below:
1. Tune to the desired station.
2. Push and hold the desired numbered button for more than two seconds, or until you
hear a confirmation beep.
72