Road Tire Installation - Fiat 500x 2016 User Manual

Hide thumbs Also See for 500x 2016:
Table of Contents

Advertisement

WHAT TO DO IN EMERGENCIES
9. Lower the vehicle to the ground by turning the wheel bolt wrench counterclockwise.
10. Finish tightening the wheel bolts. Push down on the wrench while at the end of the
handle for increased leverage. Tighten the wheel bolts in a star pattern until each
wheel bolt has been tightened twice. The correct torque specification for the wheel
bolts is 89 Ft-Lbs (120 Nm). If in doubt about the correct tightness, have them
checked with a torque wrench by your authorized dealer or at a service station.
11. Securely stow the jack, tools, chocks and flat tire.
A loose tire or jack thrown forward in a collision or hard stop could endanger the oc-
cupants of the vehicle. Always stow the jack parts and the spare tire in the places pro-
vided. Have the deflated (flat) tire repaired or replaced immediately.

Road Tire Installation

1. Mount the road tire on the axle.
2. Install the remaining wheel bolts with the threaded end of the wheel bolt toward the
wheel. Lightly tighten the wheel bolts.
To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully
until the vehicle has been lowered. Failure to follow this warning may result in serious
injury.
3. Lower the vehicle to the ground by turning the jack handle counterclockwise.
4. Finish tightening the wheel bolts. Push down on the wrench while at the end of the
handle for increased leverage. Tighten the wheel bolts in a star pattern until each
wheel bolt has been tightened twice. The correct torque specification for the wheel
bolts is 89 Ft-Lbs (120 Nm). If in doubt about the correct tightness, have them
checked with a torque wrench by your authorized dealer or at a service station.
5. Lower the jack until it is free. Remove the wheel chocks. Stow the jack and tools back
in the proper storage location. Release the Electric Park Brake before driving the ve-
hicle.
6. After 25 miles (40 km) check the wheel bolt torque with a torque wrench to ensure
that all wheel bolts are properly seated against the wheel.
150
WARNING!
WARNING!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents