Sending A Fax - Samsung MultiXpress M537x series Basic Manual

Sending a fax

This section explains how to send a fax and the special methods of transmission.
You can place the originals use either the DSDF or the scanner glass. If the
originals are placed on both the DSDF and the scanner glass, the machine
will read the originals on the DSDF first, because it has higher scan priority.
6
Setting the fax header
In some countries, you are required by law to specify your fax number on any fax
you send.
1 Tap Settings > Fax Settings > Machine ID & Fax No on the display
screen.
Tap the ID Name input box. The pop-up keyboard appears.
2
Enter your name or the company name (see "Understanding the pop-up
3
keyboard" on page 39).
4 Tap Done.
5 Tap the Fax Number input box.
6 Enter your fax number using the numeric keypad on the control panel.
7 Tap Done.
8 Tap or select other settings.
7
Sending a fax
Place the originals face up in the DSDF or place a single original face
1
down on the scanner glass and close the DSDF (see "Loading originals"
on page 46).
2 Tap Send from the home screen or Apps.
3 Adjust the document settings in the Send tab or More tab.
4 Tap and enter a fax number directly using
or using Favorites, Recent, Groups, Contacts tap from the display
screen.
• You can send a fax up to 10 destinations at once.
• You can view and delete a destination from
• To insert a pause, tap
appears on the display when a pause is inserted.
• If you want to use On Hook dial, tap
the numeric keypad on the screen while you hear the dial tone.
Press to start the process.
5
on the screen, then tap
Destination List (
while entering the fax number. A dash (-)
and enter a fax number using
6. Scan & Send (Faxing)
).
143