Sending A Fax - Samsung SCX-4x25 Series User Manual

faxing
This chapter gives you information about using your machine as a fax machine.
This chapter includes:
•

Sending a fax

• Receiving a fax
• You cannot use this machine as a fax via the internet phone. For
more information ask the internet service provider.
• We recommend you to use traditional analog phone services
(PSTN: public switched telephone network) when connecting
telephone lines to use Fax. If you use other Internet services (DSL,
ISDN, VolP), you can improve the connection quality by using the
Micro-filter. The Micro-filter eliminates unnecessary noise signals
and improves connection quality or Internet quality. Since the DSL
Micro-filter is not provided with the machine, contact your Internet
Service provider for use on DSL Micro-filter.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
SENDING A FAX
Setting the fax header
In some countries, you are required by law to indicate your fax number on
any fax you send. The Machine ID, containing your telephone number and
name or company name, will be printed at the top of each page sent from
your machine.
1. Press Menu until System Setup appears on the bottom line of the
display and press OK.
2. Press OK when Machine Setup appears.
3. Press OK when Machine ID appears.
4. Enter your name or the company name using the number keypad. You
can enter alphanumeric characters using the number keypad, and
include special symbols by pressing the 0 button. For details on how to
enter alphanumeric characters, see page 26.
5. Press OK to save the ID.
6. Press the left/right arrow until Machine Fax No. appears and press OK.
7. Enter your fax number using the number keypad and press OK.
8. Press Stop/Clear to return to ready mode.
Adjusting the document settings
Before starting a fax, change the following settings according to your
original's status to get the best quality.
41 _Faxing
Downloaded From ManualsPrinter.com Manuals
• Other ways to fax
• Fax setup
Resolution
The default document settings produce good results when using typical
text-based originals. However, if you send originals that are of poor
quality, or contain photographs, you can adjust the resolution to produce
a higher quality Fax.
1. Press
Fax.
2. Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3. Press the left/right arrow until Resolution appears and press OK.
4. Press the left/right arrow until the option you want appears and press
OK.
5. Press Stop/Clear to return to ready mode.
Recommended resolution settings for different original document types
are described in the table below:
MODE
Originals with normal sized characters.
Standard
Originals containing small characters or thin
Fine
lines or originals printed using a dot-matrix
printer.
Originals containing extremely fine detail. Super
Super Fine
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
•
•
Originals containing shades of gray or
Photo Fax
photographs.
The resolution setting is applied to the current fax job. To change the
default setting, see page 46.
Darkness
You can select the default contrast mode to fax your originals lighter or
darker.
1. Press
Fax.
2. Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
RECOMMENDED FOR:
For memory transmission, Super Fine
mode is not available. The resolution
setting is automatically changed to
Fine.
When your machine is set to Super
Fine resolution and the fax machine
with which you are communicating does
not support Super Fine resolution, the
machine transmits using the highest
resolution mode supported by the other
fax machine.