Uconnect 5.0 Owner's Manual Supplement page 72

The following example shows how to use voice control to
plan a journey to your Home address:
1. Push the "Voice Recognition" button on the steering
wheel to turn on the microphone.
You see a screen with examples of com-
mands you can say.
NOTE: Press the "Help" button in the Main menu then
press "What can I say?" to see a full list of commands you
can say.
2. When you hear a beep, say a command of your choice.
For example, you can say "Navigate home."
For some phrases, you are asked for confirmation.
NOTE: For the best recognition of what you say, speak
normally without trying to articulate words in an un-
natural way. If there is excessive road noise, for example,
you may need to speak in the direction of the micro-
phone.
3. If the command is correct, say "Yes."
If the command is incorrect, say "No" and repeat the
command after you hear the prompt and tone again.
Your navigation system plans a route from your
current location to your destination.
NOTE: To stop your navigation system from listening
out for further commands, say "Cancel."
NAVIGATION 71
7