Mounting The Bike Handle - Stihl KM 55 Instruction Manual

The following STIHL KombiTools may be
mounted on the KombiEngine
KombiTool Purpose
FS-KM Brushcutter with
mowing head
1)
FS-KM Brushcutter with
grass cutting blade
1) 2)
HL-KM 0/90° Hedge trimmer,
adjustable
1) 2)
HL-KM 135° Hedge trimmer,
adjustable
2)
HL-KM 0° Hedge trimmer
1)
FH-KM Power scythe
2)
HT-KM Pole pruner
1)
BF-KM Pick tine cultivator
2)
FCB-KM Power edger
2)
FCS-KM
2)
KB-KM Bristle brush
2)
KW-KM PowerSweep
1)
Barrier bar must be mounted on
loop handle
2)
Unsuitable or not approved for
KombiEngines with bike handle
KM 55

Mounting the Bike Handle

7
6
4
2
3
1
Fitting the handlebar
: Place the clamp (1) and handle
support (2) on the drive tube (3).
: Position the handlebar (4) in the
handle support – the rubber grip (5)
must be on the left (viewed from
engine).
: Place clamp (6) on handle support.
: Insert screws (7) in the holes and
screw down as far as stop in clamp.
5
: Secure handlebar (4) on the drive
tube (3) at distance (A) of approx.
15 cm (6 in) from the powerhead.
: Align the handlebar.
: Tighten down the screws firmly.
English / USA
A
4
3
11