Hardware Documentation Updates - Fujitsu SPARC Enterprise M3000 Product Notes

Hardware Documentation Updates

This section contains late-breaking hardware information that became known after
the documentation set was published and corrections in the SPARC Enterprise
M3000 server hardware documentation.
TABLE 3
Hardware Documentation Updates
TABLE 3
Title
SPARC Enterprise
M3000 Server Site
Planning Guide
SPARC Enterprise
M3000 Server Overview
Guide
SPARC Enterprise
M4000/M5000 Servers
Service Manual
12 SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010
lists known documentation updates.
Page Number Update
2-4, 2-5 The height of container box indicated in TABLE 2-2 "Physical
Specifications" and FIGURE 2-3 "Server Container Box" will be
corrected. The correct value is 289 mm/11.4 in..
3-6 The rush current and leakage current values will be added to
TABLE 3-3 "Electrical Specifications". See
Specifications" on page 13
1-24 Section 1.4.5.2, "CD-RW/DVD-RW Drive Unit" will be changed.
See "CD-RW/DVD-RW Drive Unit" on page 10
1-25 1.4.6.2 "SAS Port"
The article on "SAS Port" will be replaced by the following.
The SAS port connects the server to an external device, such as
a tape drive, which has an SAS interface. For information on
which devices can be connected, contact a service engineer.
Note that the transfer rate of this port is up to 600MB/s (3Gbps
x 2wide).
11-1 "Accessing the CD-RW/DVD-RW Drive Unit," in Section 11.1,
will be added the explanation of the type of the drive unit and
the identifying the drive unit. See
Unit" on page 10
for detail.
"CD-RW/DVD-RW Drive
for detail.
"Electrical
for detail.