Basic Copying - Canon ImageRUNNER 2422L User Manual

Basic Copying

This section describes the flow of basic copy operations.
NOTE
•
For instructions on turning ON the machine, see "Main Power and Control Panel Power,"
2
on p. 1-15.
•
For instructions on routine maintenance, see Chapter 6, "Routine Maintenance," in the
Reference Guide.
•
The output quality may deteriorate if the platen glass is dirty. Always keep the platen
glass clean.
•
Do not touch the optional feeder or platen cover while copying. Rocking the feeder or
platen cover may distort the image being copied.
1
Press the appropriate keys in accordance with the messages
displayed on the LCD display.
If there are no messages displayed, proceed to step 2.
● If the message <Dept. ID/Pass Input> appears:
Dept. ID/Pass Input
ID Key after Input
When done press ID key
Dept. ID/Pass Input
ID Key after Input
When done press ID key
2-12

Basic Copying

Dept. ID:0000001
Password:
Dept. ID:0000001
Password:*******
NOTE
For instructions on using Department ID Management, see Chapter 4, "System
Manager Settings," in the Reference Guide.
❑
Enter your Department ID (up to seven
digits) using -
❑
Use [ ] or [ ] to select <Password:> ➞
enter the password (up to seven digits)
using - (numeric keys).
❑
Press (ID).
(numeric keys).