Setup - Kenwood TS-590SG Manual

EXPANSIVE APPLICATION SOFTWARE 08
Figure 8-10 Flow of the Audio Signal

8.5.3 Setup

Configure the necessary settings to use ARUA-10.
Right click the ARUA-10 icon in the Windows task tray and select Device Setup in the menu and the Setup dialog box
will appear. In the Device tab, you can set up the device to input/output the audio signal.
Figure 8-11 Device Tab
In the Reception Output of the Transceiver frame, Microphone (USB Audio CODEC) must be selected.
In the Modulation Input of the Transceiver frame, Speaker (USB Audio CODEC) must be selected.
In the Microphone of the PC frame, specify the microphone of the sound device.
In the Speakers of the PC frame, specify the speaker of the sound device.
You can check the name of the sound device in the entry under Sound video and game controllers category in Windows
Device Manager.
65