Table of Contents
Advertisement
INTERNAL GPS FUNCTION ON/OFF
Press [GPS] to turn the Internal GPS receiver ON or OFF.
•
When the Internal GPS receiver is ON, the "
appears on the display.
•
When the Internal GPS receiver is On, the internal clock is
automatically confi gured with the time data from the internal GPS
receiver. When determining your position for the fi rst time after the
power supply is turned On, the clock data is automatically set and is
updated once per day thereafter.
•
You must set the time zone beforehand, through Menu No. 927.
When the Internal GPS receiver is On, pressing [POS] will
display "Latitude longitude, Time, Altitude, Travel direction,
Speed, Grid square locator, PTT frequency". Press [] to cycle
the display between "Target point name, Target point distance,
Target direction" ➡ "Log meter" ➡ "GPS satellite information".
•
Press [] to return to the previous display.
<Latitude longitude, Time, Altitude, Travel direction, Speed,
Grid square locator, PTT frequency>
a: Speed b: Time c: Travel direction d: Latitude longitude
e: Altitude f: Grid square locator g: PTT frequency
<Target point name, Target point distance, Target direction,
PTT frequency>
a: Name b: Target point distance c: Target direction
d: PTT frequency
•
While the target point is displayed, press [N/H] to toggle the display
between North up and Heading up. North Up displays North as the
top and Heading Up displays the current travel direction as the top. In
the Heading Up display, a "+" or "–" sign is used to help indicate the
target direction.
<Log meter>
<GPS satellite information>
a Sky view
b 2D: Latitude/Longitude positioning
3D: Latitude/Longitude and Altitude positioning
c Satellite signal-strength bars
The sky view shows the satellites you are receiving. The satellite
signal-strength bars indicate the strength of each satellite you
are receiving. A solid bar indicates that the GPS satellite is
ready for use.
•
When only the frame of the signal-strength bar is displayed, no
contact with the satellite has yet been made.
Note:
◆
When GPS cannot be received, turn the power ON in a clear environment
(Open Sky).
" indicator
◆
While the above screen is displayed (the GPS satellite information screen is
positioning) press [MARK] (1s) to register a Mark Waypoint.
GPS DATA SETUP (1)
Enter Menu mode and access Menu 500.
■ Land Survey System Datum <DATUM>
When using the Internal GPS receiver, set up the necessary
land surveying system.
For APRS, select "WGS-84" (world land surveying system).
•
■ SBAS <SBAS>
Through the SBAS (Satellite Based Augmentation System)
geostationary satellite, when using a system which offers
information of wide scope reinforcement, set this function to
"ON".
■ GPS Data PC Output <COM OUTPUT>
Turn this function on when you want to send the Internal GPS
receiver data (NMEA) from the PC terminal.
GPS DATA SETUP (2)
Enter Menu mode and access Menu 501.
■ Sentence <SENTENCE>
Adds an NMEA sentence to the Internal GPS receiver data
output from the PC.
Set the sentence to "$GPGGA", "$GPGLL", "$GPGSA",
"$GPGSV", "$GPRMC", "$GPVTG", or "$GPZDA".
•
•
GPS – 2
This function does not work when using an external GPS
receiver.
With BEACON transmission, the "$GPGGA" and "$GPRMC"
check
( ) cannot be removed from necessary information and satellite
image information.
You cannot output an NMEA sentence from an external GPS
receiver to a PC.
Advertisement
Table of Contents
