Kenwood TS-590SG Manual page 63

EXPANSIVE APPLICATION SOFTWARE 08
The ARCP-590G has a category listing in the menu function. The listing by category as well as the conventional general
listing allows quick access to the desired function.
Figure 8-3 Menu Function
The ARCP-590G enables a user to set the delay time for switching from transmission to reception in order to address the
delay that occurs when using KNS over the network. Formerly, the last part of the transmitted voice was sometimes cut
off when switching from transmit to receive due to the difference of delay time of control commands and of audio signals.
In order to solve this problem, the timing to actually switch back to reception after the user switches to reception can be
delayed for the time period specified in ARCP-590G.
From the Tool pulldown menu, select Setup TX Control . In the Setup TX Control dialog box of transmit control you can
select delay time from the Switching the delay time from transmit to receive while the transceiver is connected to the network
dropdown list for switching back from transmit to receive when controlling over a network connection.
59