Connecting And Disconnecting Arvp-10R (Remote Station); Adjusting Volume; Virtual Com Port Driver - Kenwood TS-590SG Manual

08 EXPANSIVE APPLICATION SOFTWARE

8.6.5 Connecting and Disconnecting ARVP-10R (Remote Station)

To connect ARVP-10R to ARVP-10H, after above setting is complete, click the Connect button in the main window.
To disconnect ARVP-10R and ARVP-10H, click the Disconnect button in the main window.

8.6.6 Adjusting Volume

ARVP-10H and ARVP-10R have no function to adjust volume. Instead, use the volume mixer or volume control in Windows
to adjust volume.

8.7 Virtual COM Port Driver

To connect the TS-590SG and a PC via a USB cable to control TS-590SG, a virtual COM port driver needs to be installed
on the PC.
URL from which virtual COM port driver can be downloaded:
http://www.kenwood.com/i/products/info/amateur/software_download.html
It is not necessary to install a virtual COM port driver to connect TS-590SG and a PC using an RS-232C cable.
It is also not necessary to install a virtual COM port driver to connect TS-590SG and a PC via a USB cable when only ARUA-
10 is used. If only the built-in USB sound function of TS-590SG is used, the function runs on the standard driver of Windows.
To view the COM port number to which the virtual COM port driver has assigned the USB port of TS-590SG, open Windows
Device Manager and check Port (COM and LPT) . Locate the entry named Silicon Labs CP210x USB to UART Bridge
(COMxx) and xx in the COMxx represents the COM port number assigned by the current virtual COM port driver.
68
Figure 8-15 Detailed Settings Dialog Box (ARVP-10R)