Bang & Olufsen BeoSound 3000 2671 Service Manual page 50

5.2 Testmodes, English
Glass doors lock
TM01
TM02
TM03
TM04
TM06
When the glass doors are locked it is not possible to open them by magic open.
The glass doors can only be locked if the product is in St. by, the glass doors are
closed and only by remote control.
Press SHIFT 9 0 3 6 9 with no more than 2 sec. between the individual entering.
The display shows "LOCKED".
To unlock the glass doors press SHIFT 9 0 3 6 9 with no more than 2 sec. between
the individual entering.
The display shows "UNLOCKED".
The function will be remembered in NVRAM after disconnecting from mains.
From TM01 to TM09.
- Wait 20 - 30 sec. after connecting to mains.
- By keyboard from St.by mode: Press SOUND 0 2 5 8 RADIO with no more than
2 sec. between the individual entering. Then key in the TM no.
- By remote control from St.by (can only be done if the product is not in option 0):
- Press SHIFT 9 0 2 5 8 with no more than 2 sec. between the individual entering.
Then key in TM no.
Automatic offset-adjustment for FM is done by letting the tuner search for the
frequency 100 MHz (84 MHz for Japan) and when the signal is found the offset
will be calculated and stored in NVRAM. The display shows "A OFFSET".
If failure the display shows "TM ERROR".
Manual offset-adjustment for FM is done by key-in a frequency. The tuner search
tunes for this frequency and the offset will be calculated and stored in NVRAM.
The display shows "M OFFSET".
If failure the display shows "TM ERROR".
Read-out offset status.
If the offset-adjustment is needed the display shows "TM ERROR".
If the result of the offset-adjustment is positive the display shows "OFFSET n".
If the result of the offset-adjustment is negative the display shows "OFFSET -n".
The fi gure n is in steps of 12.5 kHz.
Read-out variant status: EUROPA (EU) FM, EUROPA (EU) FM/AM, USA (US) and
JAPAN (JP). The display shows e.g. "EU FM/AM".
If failure the display shows "TM ERROR".
Checking that the RDS name of the radio programme in question is RDS-PS.
The display shows "TM OK".
If wrong RDS name or if name is missing the display shows "TM ERROR".