Table of Contents
Advertisement
OVERVIEW
Magazine Assembly
The magazine assembly has two functions. Its primary func-
tion is to store and feed fasteners into the nose of the tool.
Its secondary function is to house the battery and battery
contact assembly.
Motor Assembly
The motor assembly is made up of components that:
• Control the piston assembly
• Control intake of the fuel/air mixture
• Vent exhaust gases
Cover and
Filters
Motor
Housing
MOTOR ASSEMBLY
Nose
TRAKFAST REPAIR MANUAL
This assembly generates and controls forces that drive
the fasteners. It will require the majority of routine service
and/or repair.
• Piston Assembly
• O-Rings
Handle Assembly
The handle assembly contains electrical components, and
the fan motor and fan. The electrical components provide
spark for combustion. The fan mixes fuel with air and also
cools the motor.
Battery LED
Fuel Cell
Indicator Light
Compartment
(opposite side)
Lockout Bar
TOOL OPERATION
HANDLE ASSEMBLY
Magazine
Locking Knob
Trigger
MAGAZINE ASSEMBLY
Follower Release
Lever
Battery Compartment
(opposite side)
Rev. 09/07
Follower
6
Advertisement
Table of Contents
