TRAKFAST REPAIR MANUAL
TOOL REASSEMBLY
Handle Assembly - part 2
Replace screw if damaged, or if washers are missing. If washers
are missing the fuel cell will not sit in handle properly, causing a
misfire.
Replace cylinder head if cracked or broken.
Replace O-Ring after cleaning, worn or pinched.
Drop oil on O-Ring. ONLY use TrakFast oil or Paslode Impulse oil
(do not use grease).
Replace Fan Blade if bent or if replacing the Fan Motor.
Place Spring in Trigger. Replace if Spring is compressed.
Place Trigger in Handle. Note the position of the Spring.
Do not place on Trigger Switch Button.
47
Rev. 09/07