All Refrigerator-Pro
Interior Components
Adjustable Interior Shelving Removal
Multi-position adjustable interior shelves can be moved
to any position for larger or smaller packages. The
cantilever shelves are supported at the back of the
refrigerator. (See Figure 5-11) Replace the shelf by
inserting the hooks at rear of the shelf into the wall
bracket. Lower the shelf into the desired slots and lock
into position.
To remove the shelf assemblies:
1. Lift front edge up.
2. Pull shelf out.
Crisper Drawer Removal
The crisper drawers are removed by grabbing the
drawer by the handle and pulling the drawers out of
the unit. (See Figure 5-12)
To replace the crisper drawers, line up the plastic lip on
the outside edge of the crisper drawer with the slots
located under the crisper cover, then slide crisper
drawers back into unit.
Crisper Cover Assembly Removal
The crisper cover assembly slides into a slot formed in
the left and right hand supports that are secured with
screws to the liner sidewall.
To remove the crisper cover assembly:
1. Remove crisper drawers from unit.
2. Reach under the crisper cover and lift up on the
crisper cover glass insert. Remove glass insert
from unit. (See Figure 5-13)
3. Grab the crisper cover assembly from the front, lift
upwards until front of crisper cover clears the front
lip of the crisper cover supports then pull straight
out.
4. The humidity damper control is separated from the
crisper cover by using a flat bladed screwdriver from
the inside of the crisper cover, and prying the top
retaining latches of the damper control off of the
crisper cover. Push the retaining latches through
until the damper control is free from crisper cover.
5. To remove the crisper cover supports, extract the
three screws securing each crisper cover support
to the liner sidewall.
Section 5 Component Teardown
Figure 5-11. Interior Shelving Removal
Crisper Cover
Figure 5-12. Crisper Drawer Removal
Crisper Cover
Support LH
Humidity
Control LH
Glass Insert
Crisper Cover
Assembly
Retaining
Latches
Figure 5-13. Crisper Cover Assembly Removal
Crisper Cover
Support RH
Screws
Humidity
Control LH
5-5