Kodak EASYSHARE W820 Extended User Manual page 65

Wireless digital frames
Hide thumbs Also See for EASYSHARE W820:
Table of Contents

Advertisement

If...
Nothing happens when
a memory card, camera,
or USB device is
connected.
Touch border doesn't
work.
Frame freezes up or
doesn't work properly.
Music doesn't play.
You set automatic
on/off but the frame
doesn't turn on and off
at the specified times.
www.kodak.com/go/support
Try one or more of the following
I
Insert a certified SD/MMC/MS/xD/CF/MD card with images into the
designated card slot, then push to seat it (see
card slot, make sure the card is seated flush with the top.
I
Make sure the USB cable that was included with your camera or
USB device is connected securely (see
I
Make sure the file format of your pictures and videos are
supported. (See
NOTE: Do not insert a SANDISK Memory Stick, PRO DUO Card or other micro or mini
memory card without an adapter.
NOTE: Pictures may take a longer time to display when: the picture/video files are
large; when using a large capacity memory card or other connected device.
I
Use your finger to make your selections on the touch-sensitive
borders (see
page
touch.
IMPORTANT:
Do not slide on the right border (tap only).
I
Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
I
Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button (for about 2
seconds), then release.
I
Press the Volume and Power buttons at the top of the frame (see
page
ii) at the same time, then tap Yes to reset the frame.
(Resetting your frame does not erase your saved files.)
I
Make sure the volume is turned up (see
I
If your frame has songs you purchased, they may be protected files.
Convert the files to standard (unprotected) AAC or MP3 formats.
I
Make sure you Enabled the on/off setting after you set the times,
then press OK (not Back). See
I
If your frame loses power, the clock returns to the factory setting
and auto on/off times are disabled. See
losing power, page
Troubleshooting and support
page
63).
3). Lights on the border show you where to
page
60.
page
23). In the top
page
24).
page
ii).
51.
Resetting the clock after
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easyshare w1020

Table of Contents