Related Manuals for Kodak EasyShare D830
Summary of Contents for Kodak EasyShare D830
- Page 1 KODAK EASYSHARE Digital Frame Extended user guide D830/D1030 www.kodak.com For help with your digital frame, www.kodak.com/go/digitalframesupport...
- Page 2 Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2009 All screen images are simulated. Kodak, EasyShare, and Perfect Touch are trademarks of Eastman Kodak Company. P/N 4H5193_en...
- Page 3 NOTE: When your hand is within indicate where to touch. Tap the lights to turn on the screen icons. To use the Quick Touch Borders, see www.kodak.com/go/support 4 Mode button 5 Power button 6 USB connector 7 Memory card slot - SD/SDHC/MMC/MS/XD 8 Memory card slot - MS Duo/Pro Duo 1 - 3 inches (2.5 - 7.6 cm)
- Page 4 Back View 1 Faceplate attach clips (4) 2 DC-In 3 Rotating stand 4 Wall mounting holes (3) www.kodak.com/go/support...
-
Page 5: Table Of Contents
Deleting pictures ... 20 Creating and playing a multimedia slide show ... 21 Changing your frame orientation ... 23 Adding a new standard picture frame ... 24 Hanging your frame on the wall ... 28 4 Changing settings and more ...29 www.kodak.com/go/support... - Page 6 Picture frame problems ... 34 Screen messages... 37 6 Appendix ...39 Digital frame specifications... 39 Important safety instructions ... 40 Upgrading your software and firmware... 40 Additional care and maintenance ... 41 Limited warranty ... 41 Regulatory compliance and advisory ... 43 www.kodak.com/go/support...
-
Page 7: Getting Started
Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler! Setting up your frame Attaching the stand Your frame displays pictures in landscape orientation orientation see page www.kodak.com/go/support When displayed with the stand extended, the frame rests at a 68 - 90 degree angle. -
Page 8: Attaching The Power Cable
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. www.kodak.com/go/support... -
Page 9: Turning Your Frame On And Off
Turning your frame on and off www.kodak.com/go/support Getting started Power button - press and hold (for about 2 seconds), then release When you turn off the frame (but leave it plugged in), it retains information, like the time and date. -
Page 10: Navigating Using The Quick Touch Borders
Right border lights Right border icons Menu Play Down Bottom border tap arrow lights or slide to move thru items on screen www.kodak.com/go/support Move thru the menus and thumbnail rows... - Page 11 It does not mean ’tap the icon on the screen.’ For example: ’Tap to the (Menu) icon.’ www.kodak.com/go/support Tap the light next to an icon to select it. Icons change color when they’re selected. Tap the light next to the up/down arrows move up or down through menus or rows of thumbnails.
-
Page 12: Setting Your Language
To change the language at a later time: (Menu). Tap the down arrow to highlight (Settings); tap the down arrow to highlight Language. The language screen appears. Tap an up/down arrow to highlight your language, then tap OK. page to highlight (Settings). Tap www.kodak.com/go/support... - Page 13 To reset the clock and re-enable your on/off times, see Resetting the clock and calendar after losing power, page www.kodak.com/go/support 3 Set the clock. Tap the down arrow slide or tap between the left/right arrow lights to select the current time (based on a 24-hour clock).
-
Page 14: Inserting A Memory Card
SECURE DIGITAL/SECURE DIGITAL High Capacity (SD/SDHC) Bottom slot: MS/MS Pro Duo (MEMORY STICK) Supported USB devices include a flash drive, card reader, hard drive*, etc. USB devices and cables are sold separately. * External hard drives must be self-powered. www.kodak.com/go/support... -
Page 15: Attaching The Included Faceplate
Getting started Attaching the included faceplate To attach To remove You can also personalize your KODAK EASYSHARE Digital Frame by putting a standard picture frame over the digital frame’s panel. See Adding a new standard picture frame, page www.kodak.com/go/support... -
Page 16: Viewing Pictures
(see page 8). Your pictures play automatically. NOTE: Your frame may have pre-loaded pictures, which start playing if you do not insert a memory card or USB device with your own pictures. You cannot delete the pre-loaded pictures. www.kodak.com/go/support... -
Page 17: Viewing Your Pictures
– When Shuffle is on (the default setting, order. – When Shuffle is off, pictures play according to your Display Picture Order By setting, see page www.kodak.com/go/support 1 Tap (Menu), then tap All connected sources and internal memory are listed. 2 Tap an up/down arrow... -
Page 18: Changing Viewing Modes
Calendar—a calendar with today’s date highlighted is displayed on one side of the screen, while the pictures in your current picture source play on the other. Changing frame settings, page Single picture (default) Calendar/picture www.kodak.com/go/support Collage (6 pictures) Clock/picture (see (see... -
Page 19: Viewing Pictures In Collage Mode
While play is paused, tap page 16). (Play) to resume collage play. NOTE: Multimedia slide shows do not play in collage mode. www.kodak.com/go/support Mode button to highlight a different picture in the collage. (Menu) to access the main menu options Viewing pictures... -
Page 20: Viewing Thumbnails
(about 3 seconds). To play a folder of images, highlight the folder then tap To play a slide show, highlight the thumbnail and tap to select a picture source, then tap OK www.kodak.com/go/support Thumbnails screen (Menu). -
Page 21: Viewing A Single Picture
The Default Play Location icon source (see page 11). www.kodak.com/go/support To view a single, full-screen picture, highlight it in thumbnails view, then tap OK. Or, when a slide show is playing, tap a Quick Touch Border (right or bottom). The slide show is paused and the picture in view is displayed. -
Page 22: Doing More With Your Frame
View all available picture sources. Start here to play your pictures (see page 11). View and play all available multimedia slide shows View all pictures in your current picture source as thumbnails page 14). to highlight a menu (see page www.kodak.com/go/support 22). (see... - Page 23 Multi-select Available from the Thumbnails menu only Select/Deselect All Copy Rotate Delete Settings www.kodak.com/go/support Description Select multiple pictures and videos for copy, rotate, delete, or play (see page 18). Select or deselect everything in your current picture source page 18).
-
Page 24: Selecting Multiple Pictures
Select All. To deselect all pictures at once, tap (Menu), then tap Deselect All. To quickly deselect many pictures, tap (Menu), then tap Select All, then tap Deselect All. www.kodak.com/go/support to highlight Multi-Select, (Select). to move to the (Deselect) (Menu),... -
Page 25: Copying On Your Frame
(smaller size). Full resolution is unnecessary for viewing and quickly fills up the frame’s memory. To turn off the automatic resizing feature, tap Menu (see Settings menus, page www.kodak.com/go/support page see page (Copy). to highlight the copy-to destination, then tap OK. -
Page 26: Rotating Pictures
To change your mind, highlight No, then tap OK to return to the menu. page 14) or display it in single view see page (Rotate). to highlight the direction and degree of rotation, then page 14) or display it in single view page (Delete). www.kodak.com/go/support... -
Page 27: Creating And Playing A Multimedia Slide Show
(WINDOWS OS only). Then copy the slide show to your frame. NOTE: D830/D1030 Digital Frames do not support audio or video playback. Therefore, audio and video portions of a multimedia slide show (if included) do not play on your frame. - Page 28 4 In the Viewer pane, select the pictures, then drag and drop them to the Slide Show Editor. Drag pictures in the Editor to change the play order. 5 Click Save. 6 For more details on creating multimedia slide shows, click Help. (Play). www.kodak.com/go/support...
-
Page 29: Changing Your Frame Orientation
(Menu), then tap 2 Tap the down arrow 3 Tap the down arrow to highlight Portrait, then tap OK. 4 Tap to exit. www.kodak.com/go/support Portrait Rotate the stand 90 º. To adjust the display angle, move the stand to a different slot. -
Page 30: Adding A New Standard Picture Frame
Doing more with your frame Adding a new standard picture frame You can personalize your KODAK EASYSHARE Digital Frame by putting a standard picture frame over the digital frame’s panel. Match your home décor and style by choosing from the thousands of standard picture frames on the market, even a favorite you might already have. - Page 31 4 Attach the frames together according to the following directions. Keep any leftover foam spacers for later use. 5 When attached, make sure the digital frame is secure within the picture frame and can’t shift or move around. www.kodak.com/go/support Doing more with your frame (see...
- Page 32 If a deep picture frame places the slot above the clips, carefully bend the clips up—slightly above the slot. Then, rotate and depress the clips to slide them into the slot. Tighten the screws to secure the clips. Be careful not to over-tighten. Glass removed www.kodak.com/go/support...
- Page 33 Stack the spacers if necessary. Avoid adding more spacers than necessary to prevent excessive force against the clips. If necessary: Tighten the screws to secure the clips. Be careful not to over-tighten. www.kodak.com/go/support Doing more with your frame Foam spacers...
-
Page 34: Hanging Your Frame On The Wall
Hanging your frame on the wall To hang your frame on the wall, remove the stand, then use wall anchoring hardware (not included) to securely mount the frame to the wall. Back View, page ii for the location of the mounting holes. Foam spacers www.kodak.com/go/support... -
Page 35: Changing Settings And More
(on an inserted memory card or flash drive, or copied into internal memory). Duration Transition www.kodak.com/go/support (Settings). to highlight a setting, then tap OK. Options Install now—load the latest version of firmware on your frame (page 32). - Page 36 Change the frame orientation setting, page On (default)—copy pictures to internal memory at a lower resolution (smaller size). Off—copy pictures to internal memory at full resolution. page 19. Full resolution is unnecessary for viewing and quickly fills up the frame’s memory. 31). www.kodak.com/go/support...
- Page 37 Setting Fit or Fill Specify how to scale the pictures on the screen. KODAK PERFECT TOUCH Technology Automatically enhance your pictures to look their best on your frame. Display Picture Order By Specify the order in which to play your pictures—by date or file name.
-
Page 38: Upgrading Your Firmware (Recommended)
Changing settings and more Upgrading your firmware (recommended) Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to 2 Follow the screen directions to download the frame firmware to your computer. -
Page 39: Maintaining Your Frame
Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes www.kodak.com/go/digitalframesupport www.kodak.com/go/support Changing settings and more... -
Page 40: Troubleshooting And Support
NOTE: Pictures may take a longer time to display when the files are large or when Touch border doesn’t work. IMPORTANT: www.kodak.com/go/digitalframesupport Make sure the power cable that was included with your frame is connected securely (see page Unplug the power cable for 5 seconds, then reconnect the cable. - Page 41 Caution: Formatting deletes all pictures and videos, including destination is not full. protected files. www.kodak.com/go/support Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.
- Page 42 NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and re-enable the automatic on/off times (see page 6). It is not necessary to reset the on/off times. www.kodak.com/go/support...
-
Page 43: Screen Messages
Unable to create file. Device write protected or full. Disk full. www.kodak.com/go/support Troubleshooting and support Try one or more of the following The frame is unable to display the picture because the file is corrupted or it’s an unsupported file format page 39). - Page 44 Unknown error. Try one or more of the following Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport. www.kodak.com/go/support...
-
Page 45: Appendix
Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. KODAK EASYSHARE D830/D1030 Digital Frames Color display D830 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.3 x 11.4 cm (6.4 x 4.8 in.) viewable area D1030 26.4 cm (10.4 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio,... -
Page 46: Important Safety Instructions
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories. -
Page 47: Additional Care And Maintenance
If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. - Page 48 (such as third party ink or ink tanks), failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty.
-
Page 49: Regulatory Compliance And Advisory
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act. - Page 50 Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Hereby, Eastman Kodak Company declares that this Kodak Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
- Page 51 (separate from municipal waste). For more information, contact your retailer, collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. Product weight with adapter and stand: D830, 843 gm. D1030, 1227 gm Russian GOST-R D1030:...
- Page 52 Appendix China RoHS www.kodak.com/go/support...
- Page 53 11 cleaning frame, 33, 41 clock and timer, setting, 6, 36 clock, viewing mode, 12 collage mode, 13 www.kodak.com/go/support copying automatic resizing, 19, 30 from computer, camera, 19 to frame’s internal memory, 19 default play location, saving, 15...
- Page 54 9 memory cards, 8 standard picture frame, 24 internal memory capacity, 39 copying to, 19 KODAK PERFECT TOUCH Technology, 31 landscape, set orientation, 23 language, setting, 6 locked screen, reset, 35 memory card. See card, memory menu selections, 16...
- Page 55 30 clock and timer, 6 display picture order by, 31 duration, 29 firmware upgrade, 32 fit/fill, 31 frame orientation, 23 KODAK PERFECT TOUCH, 31 www.kodak.com/go/support language, 6 shuffle, 30 slide show starting point, 30 transition, 29 upgrade firmware, 29...
- Page 56 Index firmware, 29 software and firmware, 40 USB device, connecting, 8 viewing modes, changing, 12 picture sources, 11 single picture, 15 thumbnails, 14 viewing mode button, i wall mount, frame, 28 warranty, 41 Web sites, help, 33 www.kodak.com/go/support...