Kodak EasyShare digital picture frame User’s guide for SV-710, SV-811, EX-811, EX-1011 www.kodak.com For help with your picture frame, www.kodak.com/go/digitalframesupport...
EX models, also use to connect to camera/USB device - with adapter cable.) USB connector (SV models only, use to connect to camera/USB device. Not available on EX models.) 10 Volume control 11 Headphone jack 12 DC-In (12 V) 13 Reset button www.kodak.com/go/support...
Connecting to your computer ... 10 Copying pictures to/from your computer ... 11 Copying pictures from EasyShare software ... 11 Deleting pictures/videos ... 12 Selecting multiple pictures/videos ... 12 Selecting one at a time... 12 Selecting all ... 13 www.kodak.com/go/support...
Page 6
6 Troubleshooting and support ...28 Picture frame problems ... 28 Picture frame/computer communications ... 28 Wireless network connection (EX models)... 29 Screen messages... 32 7 Appendix ...34 Digital frame specifications... 34 Important safety instructions ... 36 Downloading your software and firmware ... 37 www.kodak.com/go/support...
Page 7
FCC compliance and advisory ... 40 FCC and Industry Canada ... 40 CE ... 41 Canadian DOC statement ... 41 Waste Electrical and Electronic Equipment labeling ... 41 Australian C-Tick... 41 MPEG-4 ... 41 MP3 Licensing... 42 www.kodak.com/go/support Table of contents...
Getting started Welcome to your Kodak EasyShare digital picture frame. Viewing your pictures and videos couldn’t be simpler! Installing the software Install the software from the CD included with your frame. The software, which includes the latest version of Kodak EasyShare software, ensures the best experience when connecting the frame with your computer.
Using the remote control Activating the remote control An activation tab protects the remote control’s battery during shipment. Storing the remote control www.kodak.com/go/support Pull out the tab to start using the remote. ■ There is no need to open the battery compartment or remove the battery.
Setting up your picture frame Buttons and controls back menu Connecting the power cable www.kodak.com/go/support All buttons and controls described in this guide (for example: press ) are on the remote control unless otherwise noted. 1 Plug in the power cable.
Connect a digital camera or other USB device. SV models a) USB cable included with your USB device. b) USB adapter cable included with your EX model picture frame. CompactFlash MicroDrive Secure Digital Memory Stick MultiMedia Card EX models www.kodak.com/go/support...
Turning on the frame Setting your language Viewing your first slide show! www.kodak.com/go/support ■ Press the power switch to On. NOTE: You can leave the power switch On, and use the remote control to turn the frame off and on.
You can change the slide duration and transition style (see ■ Viewing thumbnails ■ To view your pictures as multi-up thumbnails, press when a slide show is playing or from a single view. ■ To navigate through the thumbnails, press ■ Videos are marked with www.kodak.com/go/support page 17).
/ fast forward. adjust the volume. stop the video and return to thumbnails. www.kodak.com/go/support Viewing pictures and videos repeatedly. To view other parts of the repeatedly to return. . To play the video, highlight it...
Lets you display pictures that are stored on your computer. See Wi-Fi mode—EX models only, page Kodak Gallery (EX models)—appears if you have set up your Gallery account and are connected to a wireless network. Lets you display your albums from the Gallery.
Copying between your frame and computer Copy pictures/videos via the included USB cable. For wireless copying (EX models only), see page Connecting to your computer www.kodak.com/go/support 1 Press to find a picture/video, then press 2 Press to highlight Copy, then press OK.
USB devices. 3 Navigate to the pictures you want to copy. Then drag and drop them to the new location. (see page 10). → Copy to. (see page 10). (see page www.kodak.com/go/support...
2 Continue selecting pictures/videos. A check mark appears on the selected pictures. Press mark. You can now view a slide show, copy, print, delete, etc. all selected pictures. www.kodak.com/go/support Doing more with your frame 1 Press to find a picture/video, then press 2 Press to highlight Delete, then press OK.
4 Highlight Unselect all and press OK. A confirmation screen appears, then your picture display reappears. All check marks are removed. 1 Turn off the frame and printer. 2 Connect the USB cable (included with your frame) from the frame to the printer. www.kodak.com/go/support , highlight...
→ 3 Select Settings mode you need, printer or computer. See 4 Reconnect the printer or computer. If you are printing, continue with step 3 of the printing directions in www.kodak.com/go/support Manually changing connection mode, page page Device configuration page...
Then press 3 Press to locate your music files. Then press OK. 4 Press to go to the next or previous song, or select Play all songs. Then press OK. Your music starts playing. , then buttons. www.kodak.com/go/support (page ii).
Upgrade firmware This option is only displayed if the upgrade file (.img) is available on the frame (memory card, flash drive, internal memory, etc.). www.kodak.com/go/support , then press OK. Options Upgrade firmware—load the latest version of firmware on your frame (page 18).
Page 24
OK. The frame’s internal clock is automatically set to the correct time. Set time—manually set the clock to the current time. Set up your Kodak Gallery account on the frame (see Set up your frame for wireless operation (see www.kodak.com/go/support or portrait (default).
About Upgrading your firmware Firmware is the software that runs on your frame. To check for the latest version of firmware, visit www.kodak.com/go/digitalframedownloads. Follow these directions to download and upgrade your frame firmware. 1 On your computer, go to 2 Follow the screen directions to download the frame firmware to your computer.
Using Wi-Fi mode—EX models only Wireless operation is available on Kodak EasyShare EX-811 and EX-1011 digital picture frames. For more information on wireless operation and networks, visit www.kodak.com/go/wifisupport What are some of the wireless features of my frame? Display pictures on your frame directly from your computer hard drive (see ■...
2 Remove all memory cards or other USB devices from your frame. Turn it on. The first time you turn on your frame (after you select your language), the Network connection screen appears. www.kodak.com/go/support Using Wi-Fi mode—EX models only 3 When asked "Do you want to connect your frame to a wireless network?", select Yes, then press OK to...
3 Follow the prompts to choose the pictures, then press OK. Pictures are displayed as thumbnails. Press If your network computer is not listed on the Home screen, or for more information, go to the troubleshooting help on www.kodak.com/go/digitalframesupport. → → Manual Enable/Disable connections.
Setting up your Gallery account You can display pictures directly from the Kodak EasyShare Gallery via the Internet. Perform this one-time setup to connect your frame to your existing Gallery account. 1 Press Home , then highlight Settings 2 Select Kodak Gallery and press OK.
Slideshow Copying pictures to your computer—wirelessly Kodak picture transfer software (included on the software CD packaged with your EX-model frame) lets you wirelessly copy pictures and videos from the frame to your computer. Make sure you install the software before you proceed (see...
Internet servers. The program works behind the scenes to facilitate surfing the Web with alpha versus numeric addresses. A DNS server converts a name like mywebsite.com to a series of numbers like 107.22.55.26. Every Web site has its own specific IP address on the Internet. www.kodak.com/go/support...
Page 32
Using Wi-Fi mode—EX models only Domain name— The portion of a URL or Web address that identifies a specific Web site. For example, the domain name portion of the URL http://www.kodak.com is kodak.com. All domain names have a suffix that indicates the top level domain (TLD) it belongs to.
Page 33
The identifier is attached to the wireless local area network (WLAN) and acts as an identifier when a device tries to connect to the system. A device will not be permitted to join the network unless it can provide www.kodak.com/go/support...
Page 34
URL— Uniform Resource Locator: also referred to as a Web address, since it identifies the location of a file or resource on the Web. For example, the URL for the Eastman Kodak Company Web site is http://www.kodak.com. WEP—Wired Equivalent Privacy: basic wireless security provided by Wi-Fi. In some instances, WEP may be all a home or small-business user needs to protect wireless data.
If... Cannot copy pictures to my computer. Cannot see my frame as a removable drive. www.kodak.com/go/support www.kodak.com/go/digitalframesupport Make sure the power cable is securely connected Make sure you are using the power cable that was included with your frame. Make sure the power switch on the frame is On Check the battery in the remote.
Troubleshooting and support If... Cannot copy pictures from Kodak EasyShare software. Wireless network connection (EX models) Problem Frame cannot connect to the wireless network — "Wireless network not found" appears. Try one or more of the following ■ Make sure your frame and computer are on.
Page 37
Frame cannot connect to the wireless network — "Wireless network not found" appears. www.kodak.com/go/support Possible causes and/or solutions ■ Make sure the network profile settings on your frame match those of the network. In an Infrastructure network, you can...
Page 38
Troubleshooting and support Problem (Continued ) Frame cannot connect to Kodak EasyShare Gallery. Possible causes and/or solutions The wireless router did not assign a valid network IP address to the frame. Check and change the router settings, as indicated below.
Unknown error. Please enter your SSID. Printer unavailable. Unable to connect to printer. www.kodak.com/go/support Troubleshooting and support Try one or more of the following The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected.
Page 40
Contact your system administrator or the person who set up your wireless network. The frame was unable to copy the picture. ■ Insert a different card or device the picture location setting www.kodak.com/go/support 14). (page 5), or change (page (page...
For more specifications, visit www.kodak.com/go/digitalframesupport. Kodak EasyShare digital picture frame Wi-Fi wireless network compatibility SV-710, SV-811 No EX-811, EX-1011 Yes. Wi-Fi 802.11b protocol—compatible with Wi-Fi wireless 802.11b and 802.11g networks. Color display SV-710 17.8 cm (7 in.) diag. analog LCD, 480 x 234 pixels, 16:9 aspect ratio, 154 x 87 mm (6.1 x 3.4 in.) viewable area...
Page 42
SV-710: 26.2 cm (10.3 in.) x 19.3 cm (7.6 in.) x 3.8 cm (1.5 in.) SV-811, EX-811: 28.5 cm (11.2 in.) x 21 cm (8.3 in.) x 3.8 cm (1.5 in.) EX-1011: 33 cm (13 in.) x 24 cm (9.5 in.) x 3.8 cm (1.5 in.) °...
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. ■ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories. ■...
Downloading your software and firmware Download the latest versions of the software included on the Kodak EasyShare software CD and the frame page 18 for upgrading firmware.
If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid.
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Appendix FCC compliance and advisory Kodak EasyShare digital picture frame This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This digital picture frame EX-811 and EX-1011 transmits in 12dBm. In France, the power level is limited to 10dBm in outdoor environments, per regulations. When in France, use the wireless functions of this device indoors only.
(via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com. www.kodak.com/go/support...
Page 50
EasyShare gallery problem connecting, 31 set up account, 17, 22 viewing your albums, 22 EasyShare software copying pictures from, 11 installing, 1 error messages, 32 faceplate, i fast forward video, 3, 8 firmware checking version, 18 upgrading, 16, 18, 37 www.kodak.com/go/support...
Page 51
3 changing picture locations, 9 screen, 9 installing software, 1 internal memory capacity, 34 internet requirements for wireless, 19 landscape, set orientation, 17 www.kodak.com/go/support language setting, 18 setting first time, 6 LCD. see screen loading software, 1 magnify picture, 3...