Using wireless mode
Copying wirelessly to/from your computer
The KODAK EASYSHARE Digital Display Software (included on the CD that was
packaged with your frame) lets you drag and drop (copy) pictures, videos, and music
wirelessly between your frame and computer or other connected devices
Before you proceed:
1 Make sure you install the software packaged with your frame
your wireless home network
(page
22).
Your frame can now access the content on your host computer, wirelessly.
NOTE: If you have more than one frame on your wireless network, give them unique names so you can tell
them apart. Go to Home
2 Make sure the USB connection mode on your frame is set to Computer (see
page
34).
3 Double-click
desktop to open the software.
The frame, memory card, and connected devices (see
Drop Zone.
44
(page
5), then verify your computer connection
→
→
Settings
(KODAK EASYSHARE Digital Display Software icon) on your
Device configuration menu,
page
www.kodak.com/go/support
(page
(page
9). Connect to
see page
50.
24) appear in the Drag and
24).